Sensor solutions for shuttle systems in intralogistics
Shuttles are compact, automated warehouse vehicles used for storing and retrieving goods within shelving systems. They generally move within a defined storage level and can be operated largely independently of one another. Using multiple shuttles in parallel can significantly increase a warehouse’s handling capacity, since transport routes can be used simultaneously and the transport of goods to the lift can be handled in parallel.
Applications for pallet shuttles
Positioning of the pallet
Requirement:
To ensure a defined distance between the pallets, the distance between the shuttle and the stored pallet must be precisely determined regardless of surfaces, colors or angles.
Solution:
The ODS 110 measuring distance sensor or the HT 110 switching variant determine the distance to a non-cooperative target and provide the information as a measurement value or as a switching output. With an operating range of up to 5,000 mm, the devices offer an accuracy of typ. ±15 mm.
Positioning of the shuttle at the aisle end
Requirement:
The first pallet in an aisle should always be placed at a defined distance from the aisle end. To do this, the position of the shuttle at the aisle end must be determined.
Solution:
The ODS 110 measuring distance sensors or the HT 110 switching variant operate using the time-of-flight (TOF) method and provide reliable results over distances of up to 3 m for any material. All devices are equipped with an IO-Link interface. With the HT 110, two switching outputs can be set independently of position.
Presence / position control of the pallet
Requirement:
After transferring the pallet on the shuttle, it must be checked whether the pallet has been placed correctly. For this purpose, the presence of the pallet is to be checked at one or more defined positions on the shuttle.
Solution:
The HT 3C optical sensors reliably detect pallets thanks to active background suppression and ambient light sensitivity. The HT 3C series offers robust solutions, e.g. for the detection of objects with colored structure, objects with openings or highly polished surfaces.
> Read more about diffuse sensors with background suppression
Applications for shuttles handling containers and cartons
Monitoring of projection and overhang
Requirement:
Before the shuttle starts moving, it must be checked that the load has been completely picked up or unloaded and that there is no overhang.
Solution:
With their compact cubic design, the 5 series optical sensors are used for powerful and cost-optimized standard detection tasks. The integrated M3 metal threaded sleeves and the flexible cable outlet downwards or to the rear simplify installation even in situations with limited installation space.
Compartment occupation check – single-depth
Requirement:
Before a container or carton can be stored, it must be checked whether the space is free.
Solution:
The 3C series scanning sensors reliably detect objects against a background. Even objects with colored structure are reliably detected.
Compartment occupation check – multi-depth
Requirement:
Before a container or carton can be stored, it must be checked whether the space is free.
Solution:
The 25C series scanning sensors reliably detect objects against a background. Even objects with colored structure are reliably detected. For applications with operating ranges of more than 2 m, the particularly powerful long-range model is available.
Monitoring of container position on the shuttle
Requirement:
It should be determined in which area of the shuttle a container or carton is located.
Solution:
With their compact cubic design, the 5B series optical sensors are used for powerful and cost-optimized standard detection tasks.
Applications for positioning and detecting shuttles
Velocity monitoring
Requirement:
A sensor is to be installed in a shuttle to measure its speed along the transportation path.
Solution:
An EI series incremental rotary encoder mounted on the shuttle’s drive shaft with a robust HTL pulse output with appropriate resolution is an optimal solution for velocity measurement.
Collision protection
Requirement:
If several shuttles are moving within one level, it must be checked whether the transportation path is free, another shuttle is nearby or the aisle end has been reached.
Solution:
The ODS 10 distance sensor measures the distance against a non-cooperating target made of any material. Over distances of up to 8 m, the devices provide reliable results with an accuracy of typ. ±15 mm.
Referencing
Requirement:
To counteract slippage, the container should be referenced to a position at the end of the transportation path or at the transfer station. For exact referencing, the sensors used should have an accurate and reproducible switching point.
Solution:
The PRK 3C optical sensors operate according to the reflection principle. Special versions with high switching frequency and small light spot ensure an exact switching point.
Detection of the final position of the finger
Requirement:
The final position of the finger must be checked to ensure correct storage and retrieval.
Solution:
The inductive sensors of the IS 208 series reliably detect metal objects. The small standard devices with a diameter of only 8 mm and robust metal housing can be easily and individually integrated into the shuttle.
Detection of the final position of the telescopic fork
Requirement:
Before the shuttle moves, it must be ensured that the telescopic fork is fully retracted. For this purpose, check the final position of the telescopic fork.
Solution:
These IS 288 series inductive sensors can be used for various detection tasks. The devices in a cubic design are available with plastic and metal housings. With its laterally aligned sensor field, space and cost-saving integration is possible.
Compartment fine positioning
Requirement:
For exact positioning of the shuttle, hole markings are made in the guide rail. These are to be detected in a reproducible manner.
Solution:
The powerful 3C series diffuse sensors with background suppression reliably detect objects against a wide variety of backgrounds. Models with laser light are available for particularly precise and fast positioning applications.
Elevator positioning for the shuttle
Requirement:
To position the elevator for transporting the shuttle to the correct level, a position sensor is needed to compensate for variations in load.
Solution:
The AMS 100i position sensors with laser and exceptionally short minimum sensing distance can be easily integrated beneath the elevator platform. With a deflecting mirror and various mounting brackets available as accessories, numerous variants are available for nearly any application. They can be connected directly with interfaces such as SSI or PROFINET.
Sensor solutions for precise shuttle processes
Shuttles must safely transport stored goods, reliably detect clear paths, and avoid collisions with other transport units or obstacles. Sensors play a central role in object detection, positioning, and monitoring of transportation paths.
Sensor solutions from Leuze are tailored to these applications’ specific requirements. They perform key tasks such as fine positioning on a shelf, checking compartment occupancy, and detecting the presence of load carriers. Sensors with switching times in the millisecond range enable precise and reliable positioning even at high movement speeds.
Their compact design allows the sensors to be integrated into even low-profile shuttle vehicles, saving space and enabling greater flexibility in vehicle design. The user-friendly design, along with easy mounting and adjustment, help to further reduce installation and commissioning times.